Proximity Switch Replacement - BallyPal

ID: 175549

Description: To replace the BallyPal Proximity Switch,...

Steps:

  1. Park the BallyPal and activate the emergency stop button.
  2. Use an Allen wrench to unbolt the two (2) 6mm screws on the Display Panel Assembly. Set aside.
  3. Unplug the connector from the switch.
  4. Using a cross-tip screwdriver, remove the switch from the tiller assembly.
  5. Replace with the new interlock (proximity) switch.
  6. Reuse screws to secure switch.
  7. Insert and tighten screws with Allen wrench to secure the Display Panel Assembly.
Back