PowerA Spectra Contoller D-Pad Replacement

ID: 178935

Description: This guide includes instructions on how to...

Steps:

1. Flip the controller over so the backplate is facing up.

2. Use a Phillips #2 screwdriver to remove the eight 7.8 mm screws that secure the rear case.

3. Hold the front case in one hand and pull the rear case off.

4. Use a Phillips screwdriver to remove the two 7.8 mm screws securing the motherboard to the chassis.

5. Gently take the motherboard off of the front plate.

6. Use Phillips screwdriver to remove the four 7.8 mm screws that secure the D-pad.

7. Gently pry off the D-pad.