Boss CE-300 Super Chorus Fuse Replacement

ID: 179148

Description: You may have issues getting your BOSS CE-300...

Steps:

1. Remove the following screws with a Phillips #2 screwdriver:​
2. Two 7.5 mm
3. Two 10 mm

4. Lift the bottom panel up and off.

5. Once the bottom plate is removed, you have clear access to the fuse shown​.
6. Optional: To test the fuse, use a multimeter in the continuity setting. ​ Place the probes on each end of the fuse (polarity does not matter), if the fuse is good, the multimeter should beep.​

7. Use an opening tool to carefully remove the fuse. ​ ​
8. Avoid using metal tools near the motherboard. Any accident could break more complex components. ​
9. You may visually inspect the fuse and compare it to a replacement 0.5A fuse.