iPhone 16 Plus Loudspeaker Installation

ID: 180921

Description: Reassembly steps for the loudspeaker in the...

Steps:

1. Make sure the orange speaker gasket is fully in its slot in the frame.
2. Align the loudspeaker with its screw posts and set it into its recess.
3. Be careful not to move the orange speaker gasket during installation.

4. Use a Phillips screwdriver to install four of the screws securing the loudspeaker:
5. Three 1.5 mm‑long screws
6. One 3.0 mm‑long screw
7. Use a tri‑point Y000 screwdriver to install the 1.3 mm‑long screw securing a grounding contact and the loudspeaker.
8. Use a standoff screwdriver to install the 3.4 mm‑long screw securing the loudspeaker.
9. If you don't have a standoff driver, you may use a thin flathead driver—but be careful not to strip the shallow notches in the screw heads.