Acer Predator Helios 300 PH315-53 Battery Replacement

ID: 181511

Description: Use this guide to repair or replace the battery...

Steps:

  1. Turn off the laptop by holding down the power button for 7 seconds.
  2. Verify that the blue power indicator light is turned off.
  3. Step image Step image Step image
  4. Remove the plug from the back of your laptop.
  5. Verify that the charging light is off after you remove the plug.
  6. The battery’s charging light turns “amber” when plugged into the power cord and charging. The indicator light switches to blue once the battery is fully charged.
  7. Step image Step image
  8. Remove the eleven screws from the bottom case with a Phillips #1 Screwdriver.
  9. Step image Step image Step image
  10. A spudger is a tool that can help separate electronic panels without scratching or damaging your device.
  11. Use your thumb to apply gentle upward pressure on the laptop vent while using a spudger to separate the bottom case from the top case.
  12. Work the spudger along the seam where the bottom case meets the top case.
  13. Apply gentle upward pressure on the opposite laptop vent as you work the spudger across the back of the laptop.
  14. Step image Step image Step image
  15. Turn the laptop so the laptop vents are facing away from you and the bottom case remains face up.
  16. Use your fingertips to pull gently upward on the vents while using your palms to apply gentle downward pressure on the bottom case.
  17. Move your hands outward from the center of the laptop to each side, continuing to pull the bottom case gently upward with your fingertips.
  18. Lift the bottom case away from the laptop.
  19. Step image Step image Step image
  20. Always consider protecting against electrostatic discharge (ESD) when working on the components inside your laptop.
  21. A properly grounded ESD mat and wristband can protect your laptop from ESD damage.
  22. Remove the two screws securing the battery to the top case with a Phillips #0 Screwdriver.
  23. Step image Step image Step image
  24. Lift the battery up and away from the motherboard to expose its connection wire.
  25. Step image
  26. Gently remove the connection wire from the motherboard using a spudger.
  27. Remove the cable only a little at a time from each side, as shown in the photos. This avoids damaging the connections.
  28. Lift the disconnected battery out of the laptop.
  29. Step image Step image Step image
Back