Head Strap Removal (only for the Head Strap)

ID: 181545

Description: This is a prerequisite-only guide! This guide...

Steps:

1. Peel off both front side foam pads to uncover the speaker wires.

2. Use the point of your spudger to pry out the two rubber spacers next to the headphone screws.
3. Be careful not to accidentally pry any of the speaker wires under the rubber spacer.

4. Use the point of your spudger to pry up and disconnect both the left and right headphone speaker wires.

5. Use a T6 Torx screwdriver to remove the two 12.1 mm screws (one on each side) securing the head strap to the headset.

6. Remove the two plastic spacers underneath the previously removed Torx T6 screw.

7. Thread the headphone speaker wires out through both ends of the head strap.