Logitech G X56 HOTAS Joystick Tension Spring Replacement

ID: 185023

Description: If your Logitech G X56 HOTAS Joystick (model...

Steps:

1. Turn the locking bezel counterclockwise until the joystick comes away from the base.

2. Remove the plastic ring by applying pressure and lifting equally on both sides.

3. There is a locking clamp that locks the spring that splits in two. Take one half of the clamp off, press the spring down, and take the other clamp out.
4. The spring is under compression and pops out if not done carefully.

5. Replace the old spring.