iPhone 16e Taptic Engine Installation

ID: 185189

Description:

Steps:

  1. Place the Taptic Engine into its slot in the frame.
    2. Step image Step image
  2. Use a Phillips screwdriver to install the 2.1 mm‑long screw securing the Taptic Engine.
    3. Step image Step image
  3. Use the flat end of a spudger to connect the Taptic Engine press connector.
    4. Step image
  4. Place the cover over the Taptic Engine connector.
    5. Step image Step image
  5. Use a Phillips screwdriver to install the two 2.2 mm‑long screws securing the Taptic Engine connector cover.
    6. Step image Step image
Back