Razer Tartarus V2 Case Disassembly

ID: 185537

Description: This guide will walk you through the process of...

Steps:

1. Turn the keypad upside down.

2. Gently peel off the rubber feet with a Jimmy.
3. Set the rubber grip pads aside so you can reapply them later.
4. Use a Phillips #0 screwdriver to remove the following screws:
5. Twelve 6.4 mm-long screws
6. Two 3.7 mm-long screws

7. Peel up the bottom left corner of the largest sticker.
8. Remove the 6.4 mm-long Phillips #0 screw.

9. Carefully lift the joystick module up and out.
10. Separate the top and bottom casing of the keypad.
11. Use an Opening tool to pry the case open along the edges if necessary.