How to use and maintain your tea kettle

ID: 185604

Description: [youtubevideo|ST6bdxFMLWM]Lime‑scale buildup...

Steps:

  1. Unplug the kettle from the power outlet.
  2. Lift the kettle off its electrical base and set the base aside.
  3. Allow the appliance to cool completely before handling hot parts or water.
  4. Pour roughly one liter of clean water into the kettle.
  5. Add a few spoonfuls of citric acid to the water.
  6. White vinegar can be used instead of citric acid if preferred.
  7. Return the kettle to its base and bring the mixture to a full boil.
  8. When the kettle switches off, leave the hot solution inside to sit for a short time.
  9. Carefully pour the used solution down the drain while avoiding splashes.
  10. Rinse the kettle thoroughly with fresh water to remove all acid residue.
  11. Keep all electrical sections dry during rinsing and pouring.
  12. If liquid reaches the base or contacts, remove the base and let components dry for 24 h before reuse.
  13. After everything is dry, reattach the base and resume normal use.
  14. Always consult the manufacturer’s instructions to confirm the process suits your model.
  15. Be aware that maintenance may affect warranty rights.
  16. Contact an authorised service centre if unsure or if faults persist.
Back