Haiboxing 18859 Receiver Replacement

ID: 185688

Description: Use this guide if your RC car is not responding...

Steps:

1. Remove the 4 clips holding down the hard plastic shell of the RC car. Do this by pinching them with your thumb and index finger and pulling away.

2. Lift the hard plastic shell off of the RC car.

3. Disconnect the Lego-style battery connector by gripping either side and pulling them away from each other, slowly and consistently.

4. Unfasten the Velcro strap that secures the battery.

5. Remove the battery.

6. Disonnect all connectors attached to the red, plastic receiver.

7. Remove the 8 mm Phillips #0 screw holding the front corner of the receiver down.
8. Remove the front corner piece.

9. Remove the receiver.