How To Replace the Engine Air Filter In Your 2018–2024 Jeep Wrangler JL (3.6L)

ID: 185983

Description: [youtubevideo|Ywg4DIhnIYg]This guide shows how...

Steps:

  1. Locate the engine air filter housing in the engine bay. It's near the front left corner.
  2. Unclip the four clips that secure the top of the air filter housing.
  3. Use a 10 mm socket to remove the two hex bolts holding the housing.
  4. Lift the housing cover, pull out the old air filter, and clean out any debris inside the housing.
  5. Place the new air filter into the housing.
  6. Make sure the housing is seated in its single correct orientation before fastening.
  7. Thread and tighten the two 10 mm hex bolts back into the housing.
  8. Press down on the housing lid and re‑engage the four fasteners.
Back