Nespresso Vertuo Next Lower Water Line Replacement

ID: 186117

Description: Use this guide if you have a non-working or...

Steps:

1. Insert an opening tool in the seams between the rear panel and chassis.
2. Pry off the rear panel.
3. You may need multiple opening tools at once in order to open the device panel.

4. Remove the four 13.5 mm screws on the base plate using a T18 Torx screwdriver.

5. With tweezers, pinch one half of each connected pair of wires, and then gently pull and disconnect the wires.
6. Use a pair of tweezers to clamp down and disconnect the water line connecting to the base plate of the machine.
7. Remove the base plate from device
8. Wires can be fragile, handle with care.

9. Remove the rubber hoop connecting the motor to the base.
10. Lift the motor off of baseplate and pull waterline away from the base.

11. Remove the waterline from the clear water hub by pulling on the end of the line that connects to the main hub at the base.
12. Ensure that you pull tightly on the line in order to remove it