Ozeino OW810 Battery Replacement

ID: 186162

Description: If your Ozeino OW810 headset is not charging...

Steps:

1. Insert a nylon spudger in the seam between the right ear pad and the driver housing.
2. Pry the right ear pad off.

3. Use a Phillips #000 screwdriver to remove the six 3.2 mm screws securing the right driver housing.

4. Lift the driver housing off, with care not to strain the connected cables.

5. Use a nylon spudger to gently pry out the battery.
6. Do not use a metal spudger to pry out the battery. Metal spudgers can easily puncture the battery.

7. Remove tape from the battery.
8. Pull the circuit board up along with the wiring from either side.
9. Replace battery.