Replace your charging port

ID: 186359

Description:

Steps:

1. if your phone no longer manages to complete its charge despite having already changed the charging cable, the charging problem could be the charging port
2. It is recommended that your phone be charged to less than 20%, then power off the phone before you begin the repair.
3. It is recommended to back up the most important data stored on your phone in case of any errors.
4. Remove the SIM card to be able to work, apply heat slightly to the edges of the phone using a heat gun without making direct contact with it.
5. Once the phone is open, remove the screws and put them in a safe place to store them.
6. Once the screws are removed, disconnect the cables connecting the display to the motherboard.
7. Once you have located the charging board, carefully apply heat with the soldering iron to its solder joints until you are able to remove it from the logic board.
8. Using a new charging board of the same model, replace the old charging port by aligning it correctly with its board.
9. Once the charging port is replaced, proceed to reassemble the phone to its previous state by carefully connecting the cables and installing all the screws.
10. To reseal the phone, you can use a small amount of adhesive on the edges.
11. wait a few minutes before turning the phone back on