Replacing Toshiba NB205 N330PK Power Button

ID: 18995

Description:

Steps:

  1. Start by first removing the battery.
  2. Move the first release switch to the right position.
  3. Move the second release switch to the right position while pulling the battery towards the top of the netbook.
  4. Step image Step image
  5. Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
  6. Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper
  7. Step image Step image
  8. While holding the top of the netbook, flip the netbook over.
  9. Step image Step image
  10. Carefully lift off the power bar assembly for access to the button and receiver.
  11. Step image Step image
Back