Cobra 29 LTD Classic Outer Cover Replacement

ID: 19059

Description: This outer cover is the main cover that...

Steps:

1. Turn the power switch, the leftmost knob, counterclockwise to off.

2. Turn the device around and firmly pull the power cable plug to remove it from the radio.

3. Unscrew the securing cap counterclockwise from the antenna connector.

4. Gently pull the antenna cable to remove it from the back of the radio.

5. Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

6. Gently unplug the microphone plug.

7. Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

8. Gently life and remove the top cover.

9. Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.
10. Carefully flip the radio over.

11. Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

12. Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.
13. Gently lift and remove the case cover.