Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar

ID: 19230

Description: The expansion pipe allows the angle of the...

Steps:

1. Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.
2. Be sure the flat side of each tripod leg is facing toward the ground.

3. Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.

4. Center the bottom of the expansion pipe between the tabs of the t-bar bracket. Insert a 14mm bolt through the bracket and expansion pipe and hand thread a nut. Use 14mm wrenches to secure the assembly.
5. It does not matter which direction the 14mm bolt is inserted from.