Logitech K270 Cleanup

ID: 192138

Description: If your keyboard is VERY dirty, you could clean...

Steps:

  1. Unplug the USB receiver from any device if you have one connected to a PC/Mac/Chromebook/Raspberry Pi, or else, you’ll be charged €50/£50/$50 for repairs.
  2. Press the blow button if you have a blow dryer to blow the dirt out
  3. If you don’t have a Blow dryer, use a brush to brush everything out
  4. If any further dust (like this 5yr old K270), remove keys carefully to ensure they are removed
  5. Do not remove the keys too hard because it is a very cheap keyboard and you could damage the keys, preventing you from putting the keys back to the frame again.
  6. Clean dust in the keyboard so you can clean it properly and carefully to perfection.
  7. You could remove the top keys, but it’ll be too complicated
  8. Remove 8 Phillips screws that secure the under side to the base enclosure
  9. Pry the keyboard and remove the back cover from the main keyboard frame
  10. Remove the 2 layers of the keyboard
  11. Don’t call them silly names! 🐶
  12. Remove the main board (may have 2 Phillips that secure the mainboard)
  13. Dip the bottom cover or the front cover in soapy water for about a few hours.
  14. If it is EXTREMELY dirty, you could use UV rays to do that
  15. Well done for cleaning your Logitech K270, it feels like brand new again! Plug the USB receiver back to your PC/Mac/Chromebook/Raspberry Pi and enjoy using your new keyboard!
Back