Framework Laptop 16 Speakers Installation

ID: 194927

Description:

Steps:

1. Align the speakers over their alignment pegs and press them down into place.

2. Be very careful replacing these screws, as it's easy to damage their posts and prevent the screws from fully tightening. Don't overtighten the screws—just tighten them until they're snug.
3. Use your Framework Screwdriver to install the two 2.0 mm‑long T5 Torx screws securing each speaker (four in total).

4. Use the flat end of your Framework Screwdriver to push the speaker cable back into its clips along the bottom edge of the laptop.

5. Press the speaker cable connector onto its socket to connect it.