J-Series Schlage Doorknob Repair

ID: 195077

Description: Has your doorknob ever unlatched from the...

Steps:

1. Use a Phillips screwdriver to remove the two screws, one above and one below the door handle.
2. Remove the loose doorknob.

3. Pay close attention to aligning the holes on both sides for proper assembly.
4. Align the holes on the doorknob mechanism with the corresponding holes in the door frame.
5. Ensure a precise fit so the screws engage properly, securing the doorknob and maintaining its stability.

6. Place the screws into the knob.
7. Carefully align the screws with the corresponding holes in the doorknob.
8. Insert the screws straight and tighten evenly to prevent thread stripping or knob damage.

9. Use a Phillips screwdriver to secure the doorknob from both sides of the door.
10. Tighten the screws securely, but do not over-tighten, to avoid stripping the heads or damaging the doorknob mechanism.

11. Tighten the doorknob screws until they are snug and you feel resistance.
12. Once tightened, verify that the doorknob correctly engages with the locking mechanism, ensuring a secure and functional latch.