CAT S48c Battery Replacement

ID: 199212

Description: This is a guide to replace the battery of the C...

Steps:

1. Remove the ten T5 Torx 4 mm-long screws on the sides of the case.

2. Open the side covers and remove the SIM card with tweezers or a pick.
3. If there is an SD card remove that as well.

4. Use an opening pick to pry off the rear cover.

5. Remove the five 3 mm-long Phillips #000 screws that secure the lower midframe.

6. Use the tip of a spudger to pry up and disconnect the battery press connector.

7. Remove the five 3 mm-long Phillips #000 screws from the top section of the midframe.
8. Gently pry the section along with the battery off of the case.

9. Gently pry the battery from the case, making sure not to bend the battery.
10. Replace the battery with your replacement, popping it in the frame and insert the flex cable.
11. Keep in mind that if it has lumps or damages it could be dangerous to handle as it can catch on fire.