Kemove 98 SE Keyboard Keycap and Switch Replacement

ID: 199549

Description: Switching the keycaps and key switches on your...

Steps:

1. Unplug your keyboard from power outlet and/or your computer.
2. Line up your key cap puller to the key you want to replace and press down lightly till it doesn't move.

3. Gently pull the key from the board.
4. Use a small brush to clean the area.

5. Align the switch puller vertically around the switch.
6. Squeeze the switch puller gently and pull the switch out.

7. Align the new switch so its plugs match the corresponding plugs on the board.
8. Gently push it down.

9. Line up the new keycap with the switch.
10. Press it down gently till it reaches the bottom.
11. If it doesn't go down, then rotate the key cap till it goes down fully. It should match the other key's height.

12. Repeat the steps 2-5 for any other keys you want to replace.
13. Spray the microfiber cloth a few times with isopropyl alcohol. If you use a bottle of isopropyl alcohol, put 7-8 drops on the microfiber cloth and gently clean the area
14. Gently wipe your keyboard with the cloth to clean the keyboard.
15. After drying for 5-10 minutes, you can connect your keyboard to computer/power and use it.
16. Use the Kemove app to change the backlight color on your new keycap.