Framework Laptop 16 CPU Heatsink Installation

ID: 199822

Description:

Steps:

1. If you're removing liquid metal, follow the next two steps. Otherwise skip here to remove the thermal pad.
2. Use the flat end of your Framework Screwdriver to scrape off the hardened sections of liquid metal on the CPU.
3. Use a few drops of high concentration (>90%) isopropyl alcohol and a lint-free cloth to wipe away the remaining residue.

4. Use your fingers to peel off the plastic shield surrounding the CPU.
5. If the foam pad on the CPU doesn't come off with the tape, use the flat end of your Framework Screwdriver to pry it off.
6. Skip the next step.

7. Use a few drops of high concentration (>90%) isopropyl alcohol and a lint-free cloth to wipe away the thermal pad residue.

8. Remove the liner from the bottom of your replacement heatsink to expose the thermal pad.
9. Align your heatsink over the CPU and place it straight down onto the Mainboard.
10. The thermal pad needs to go through a few thermal cycles before it gets to full performance.

11. Use your Framework Screwdriver to install or tighten the T5 Torx screws securing the CPU Heatsink:
12. Tighten the captive screw above the primary SSD.
13. Tighten the captive screws directly over the CPU in reverse order from 4–1.
14. Install the two 2.0 mm‑long screws along the top corners of the Mainboard.