Lenovo ThinkPad T14 Gen 1 Battery Replacement

ID: 200043

Description: This guide shows how to replace the battery in...

Steps:

1. Turn off your laptop completely before starting the disassembly process.
2. Use a Phillips #1 screwdriver to loosen the following captive screws:
3. The top two 6.8 mm corner screws
4. Four 5.8 mm-long screws
5. The screws will remain in the case when fully loosened.

6. Use a plastic opening tool to pry the bottom panel.
7. Insert the end of the opening tool into the seam between the bottom and top cover.
8. Slide the opening tool around the edge of the bottom panel to release the clips holding them together.
9. The popping sounds during this process is normal.
10. Gently remove the bottom panel.
11. Using too much force can break the plastic clips securing the bottom panel.

12. Use a Phillips #00 screwdriver to take out the four 4.6 mm screws.

13. Remove the black battery connector from the motherboard by gently tugging toward the left.
14. Gently lift the top of the battery to remove it from the chassis.