Alcatel Go Flip 4 Speaker Replacement

ID: 200058

Description: If your Alcatel Go Flip 4 isn’t producing clear...

Steps:

1. Insert a spudger into the notch on the back cover and gently pry upward until you hear a soft click, indicating the back has begun to separate.
2. Continue prying around the edges until the cover is fully removed.

3. Insert a spudger into the midframe cutout and pry up to release the battery.
4. Remove the battery.

5. Use a JIS #00 screwdriver to remove all nine 4.4 mm screws that secure the midframe.

6. Run the spudger under the midframe to pry it away from the rest of the phone.
7. Be very careful when removing the midframe as too much strain can cause it to snap.
8. Set the midframe aside.

9. Place the spudger under the speaker in the midframe and pry up.
10. There is adhesive on the speaker but you should be able to remove it without heat.
11. Remove the speaker from the midframe.