Dell Precision 3510 M.2 Solid State Drive (SSD) Replacement

ID: 200081

Description: This guide will teach you how to disassemble...

Steps:

1. Flip the computer over so that you are looking at the bottom.
2. Use a Phillips #000 screwdriver to remove the eight 6.5 mm screws from the base cover.

3. Use the opening tool to carefully pry the base cover from the computer.
4. Remove the base cover from the laptop.

5. Using a Phillips #000 screwdriver, remove the two 5.5 mm screws from the battery.

6. Gently unplug the cable connected to the top of the battery.
7. Remove the battery from the laptop.

8. Use a Phillips #000 screwdriver to remove the single 3 mm screw securing the M.2 solid state drive to the system board.

9. Carefully remove the M.2 solid state drive from the system board.