Disassembling JBL Tour Pro 3 case
ID: 205026
Description: I've disassembled my JBL Tour Pro 3 case due to...
Steps:
- Start by opening the case and removing the ring at the top by prying it off of the case
- Now that the ring is off, heat up the touchscreen to loosen the adhesive behind it
- Remove the touchscreen by using a prying pick to get in between the buds crevices and the touchscreen and pry it open just enough to press another pick in between the touchscreen and the case .
- Use some isopropal alcohol to desolve the adhesive
- Pry out the insides by using the prying picks in between the sides
- Be careful for there is a cable attached to a daughter board which is screwed down at the bottom of the case.
- Remove the 2 +0 size screws and pull out the daughter board
