iPhone 17 Pro Rear Camera Assembly Removal

ID: 207259

Description:

Steps:

1. Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the rear camera connector cover.

2. Use tweezers to unlatch the rear camera connector cover from the logic board and remove it.

3. Use the point of a spudger to pry up and disconnect the three rear camera press connectors.
4. One of the connectors is under the other.

5. Use a Torx Plus 4IP screwdriver to remove the three screws securing the rear camera assembly:
6. Two 4.0 mm‑long screws
7. One 4.4 mm‑long screw

8. Use the point of a spudger to pry up the top edge of the rear camera assembly.
9. Grab the assembly with your fingers and remove it.