JBL Grip LED Board Replacement

ID: 212247

Description: This guide will walk you through safely...

Steps:

1. Slide the Jimmy along the seam to separate the case.
2. Caution: Do not bend or puncture membrane.

3. Unlatch the membrane from the rest of body.

4. Remove the eight 6mm screws securing the panel with a Phillips #2 screwdriver.

5. Flip up the black latches securing the two blue cables connected to the panel.
6. Caution: Do not pull the cables by force. Ensure the latches are fully lifted.

7. Remove the four 3mm screws securing the board to panel with a Phillips #2 screwdriver.

8. Pry the board with the plastic opening tool from the panel.