HP ProBook 450 G6 USB Board Replacement

ID: 212430

Description: HP ProBook 450 G6 faces charging/USB port...

Steps:

1. Remove the three Phillips M2.0x4.0 screws that are securing the battery.

2. Rotate the top of the battery up and lift the battery out of the Probook.

3. Remove the 2 Phillips M2.0x4.0 screws securing the thermal bracket to the notebook.
4. Lift and remove the thermal bracket out of the notebook.

5. Lift up the black latch on the ZIF connector securing the cable to the USB board.
6. Disconnect and remove the cable from the ZIF connector.

7. Remove the Phillips M2.5x4.0 screw that secures the board to the notebook.
8. Lift the top of the board up and remove the board out of the notebook.