HP Pavilion 15-cs3079nr Fan Replacement

ID: 212765

Description: If your device is too loud or overheating,...

Steps:

1. Power the device off before disassembly.
2. Close the device and flip it so the bottom panel faces up.

3. Remove the two silicon feet near the hinges with a spudger.
4. If you intend to reuse the feet, heat them with a hairdryer prior to removal and take care not to bend, warp, or stretch them.

5. Use a Phillips #0 screwdriver to remove the three 7 mm screws from the recesses.

6. Use a Phillips #0 screwdriver to remove the three silver 5 mm case screws from the front of the device.

7. Place the suction handle on the case.
8. Insert an opening pick between the case sections and work around the perimeter of the device to separate the lower case from the chassis.

9. Use a Phillips #0 screwdriver to remove the three 4.5 mm screws securing the battery.
10. The number of screws on your device might differ from the example images. Ensure all screws are removed before moving on.
11. Carefully lift and remove the battery.

12. Use a Phillips #0 screwdriver to remove the three 5 mm screws securing the fan.

13. Lift and rotate the fan so the connecting wires are straight.
14. Disconnect the fan connector from the motheboard.
15. Remove the fan.