Anker Soundcore Select 3 A3172 Speaker Cover Replacement

ID: 213493

Description: The Anker Soundcore Select 3 A3172 Bluetooth...

Steps:

1. Place the Jimmy and the metal spudger between the seal of the cover and rubber of the speaker to separate them.
2. Avoid applying too much force when placing the Jimmy and metal spudger so you do not damage the rubber casing of the speaker.
3. Slide the metal spudger around the perimeter of the case to loosen the glue.
4. You will feel some resistance when following the edge since the case is glued down.

5. Pull the cover away from the device to remove it.