NuPhy Halo 65 Back Panel Replacement

ID: 213598

Description: If your NuPhy Halo 65 has a broken or scratched...

Steps:

1. Use a keycap puller to remove the cap covering the switch you want to replace.

2. Latch the switch puller onto the switch, and squeeze lightly for grip.
3. Make sure to apply the puller to the top and bottom edges of the switch.
4. Once secure, pull to remove the switch.
5. During reassembly, don't press too hard on the switch, as this will cause the pins to bend. To fix bent pins, simply grab a pair of small tweezers or pliers and bend them straight, then repeat the process more gently.

6. Remove eleven 6.8 mm Phillips #000 screws.

7. Using a plastic pry tool, gently separate the aluminum top frame from the bottom base.
8. Unplug both connectors attaching the bottom case to the PCB.

9. Remove the silicone from the back panel.

10. You are left with the back panel.
11. If the panel bends upon removal, simply bend it back into its original shape.