Lenovo IdeaCentre K410 Heat Sink Replacement

ID: 32022

Description:

Steps:

  1. Lay the computer down on its side as shown.
  2. Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.
    3. Step image
  3. Gently slide the side panel straight back and remove from the computer.
    4. Step image
  4. Using the Phillips #00 Precision screwdriver, unscrew the four 12mm screws that hold the fan in place.
  5. Be careful not to strip the screws.
    6. Step image
  6. Unplug the fan from the motherboard by gently pulling out the single plug. Then lift the fan up and out of the computer.
    7. Step image
  7. Loosen the four screws that hold the heat sink in place using a Phillips #2 screwdriver.
  8. The screws do not come all the way out of the heat sink
  9. Pull the heat sink straight up to remove it.
    10. Step image
Back