Samsung Galaxy Attain 4G Rear Housing Replacement

ID: 34772

Description:

Steps:

1. Begin by turn the device over to it's back, with the screen facing down.

2. At the top of the device there is a small notch that is used to remove the battery door.
3. Using a pry tool or your fingernail, pry off the battery door from the main housing.

4. Place the battery door to the side.
5. Using a pry tool or your fingernail, pry the battery up towards you.
6. You have now removed the battery!

7. Make sure when replacing the battery that the arrow on the bottom is facing down.

8. Remove the 6 Phillips head screws that hold the rear housing in place.

9. Using a spudger or plastic pry tool, slowly go around the phone between the display & rear housing to release the clips.

10. Lift the rear housing from the display assembly.