Samsung DV300F Front LCD Screen Replacement

ID: 40555

Description: This guide describes how to replace the Samsung...

Steps:

1. Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
2. Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
3. Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.

4. Remove the back case of the camera carefully.

5. Remove the front case of the camera.
6. Remove the front LCD screen from the front case next to the lens.

7. Remove the blue button control from its position next to the LCD screen.
8. Pull the ribbon cable to disconnect the blue button control from the camera.

9. Remove the back LCD screen from its place carefully.

10. Flip the black tab where the back LCD screen connects to the circuit board.
11. Pull the tape connection to disconnect the back LCD screen from the circuit board.

12. Unscrew the 3 silver 4.5 mm screws from the circuit board using a Phillips #0 screwdriver.
13. Remove the circuit board cover.

14. Flip the black tab where the front LCD screen connects to the circuit board.
15. Pull the tape connection to disconnect the front LCD screen from the circuit board.
16. You can do this easily with your fingers.
17. Remove the front LCD screen from the front of the camera.