HP Envy 23-d060qd TouchSmart RAM Replacement

ID: 52117

Description: My computer really stalls when I have more than...

Steps:

  1. Use your hands to unclip the plastic snaps on the back panel of the device.
    2. Step image
  2. Remove the three 11.5mm PH2 screws from the back panel.
  3. The screws will not fall out of the back panel, but they will unscrew to release the back panel.
    4. Step image
  4. Now, take the back panel off by pulling at it gently with your hands.
    5. Step image
  5. Pop off the easy-access cover to get into the RAM module.
    6. Step image Step image
  6. Push out the four clips that hold the RAM modules to the side.
  7. The RAM modules will pop open after you unclick all four clips.
    8. Step image Step image
  8. Pull out each module.
  9. Replace RAM with desired replacement.
  10. When substituting your RAM in, make sure to line up the edges with the lines on the RAM compartment so that the RAM is able to fit inside properly.
    11. Step image
Back