Motorola Droid Turbo Dual LED Flash Board Replacement

ID: 66040

Description: Use this guide to replace the dual LED flash...

Steps:

1. Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

2. Use a plastic opening tool to pry the rear case off of the rest of the device.
3. Remove the rear case.
4. The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

5. Use a Jimmy to separate the dual LED flash board from the rear case.
6. The board is secured with some light adhesive, so some force may be required.