How to clean Lite-On LightScribe SHM-165H6S lens

ID: 6788

Description: If your drive is having problems reading or...

Steps:

1. Insert an open paper clip into the small hole on the left side of the faceplate.
2. After the tray opens, extend it fully.

3. Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

4. Pull the faceplate away from the main chassis.

5. Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

6. Lift the top and bottom chassis straight up in order to remove them.

7. Clean the lens.