HTC Wizard 200 Motherboard Replacement

ID: 6830

Description: If your HTC Wizard 200 is frequently...

Steps:

1. To expose the battery, remove the outer case with your fingernail.
2. Remove the battery by pulling the black tab.

3. Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.

4. Work the spudger around the edges of the camera cover until it comes off.

5. Remove the four 6 mm screws with the T5 Torx screwdriver.
6. One of the screws is under the "void" sticker.

7. Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.
8. Work the tool around the edges until all the clips release.

9. Once all the clips are open, remove the inner panel from the phone.

10. Use the spudger to pry the camera off.

11. Using tweezers, flip the connector latch away from the motherboard.
12. Detach the flexible connection from under the connector latch.

13. Slide the keyboard into the open position.

14. Lift the motherboard out of the case using the spudger.
15. Expose the underside of the motherboard using your hands.

16. Remove the flexible connection from the motherboard.
17. Caution: Removing the connection too fast may cause damage to the connection and cables.