Montiss Air bubble Massage Machine Fuse Replacement

ID: 78991

Description: This electronic device has fallen into the...

Steps:

1. Place the product in front of you

2. Grab the tube, twist it and take it out.

3. Turn the product upside down, you will see five holes, in which the screws are located.

4. Use a Phillips screwdriver to loosen the screws, then turn the product right side up to get the screws out of the casing.

5. Place the product on its feet and place the upper part of the casing next to the bottom part.

6. An electronic wire is connecting the two PCB’s. Take off the PCB in the lower part of the case by gently pulling the plastic housing, the connection will slowly loosen.

7. Take the PCB out of the case. Here you can see the fuse you want to replace

8. Desolder the two spots connecting the fuse to the PCB. If you have never done this before, use this guide from iFixIt.

9. Take out the fuse with some pliers, since it will be hot because of the soldering.

10. Put in a new fuse and solder it back in place. Now you can reassemble the product.