Creative Nomad Jukebox Zen Auxiliary Jack Input placement

ID: 87574

Description: Hello! This guide will show you the steps to...

Steps:

  1. Use a J0 screwdriver to remove the eight 3.5mm screws.
    2. Step image Step image Step image
  2. Use the plastic opening tool to open the top cover by carefully prying at each corner.
    3. Step image Step image Step image
  3. Once the front face is removed, remove the three 6.8mm J0 screws from the metal cover and remove it.
    4. Step image
  4. Using a soldering iron, melt the solder in order to free the auxiliary jack.
  5. How To Solder and Desolder Connections Use soldering gun with care as it becomes extremely hot and can cause burns
    6. Step image
  6. Using the plastic opening tool, gently pry up the other side of the auxiliary jack motherboard.
    7. Step image
  7. Using the plastic pulling tool, pull the plastic housing of the device out of the way in order to wiggle the the auxiliary jack motherboard free.
    8. Step image
Back