Nokia 8265 Logic Board Replacement

ID: 8984

Description: How to take out and replace the Logic Board for...

Steps:

1. Start by removing the face plate of the phone with a plastic tool.
2. Once plastic tool is wedged into the side of the phone, twist and leverage the face plate off.

3. Once the face plate is off, you will have exposed the keypad.

4. Simply remove the keypad from on top of the phone, and place it off to the side, leaving just the phone itself remaining

5. Taking a very small screwdriver, carefully unscrew the six screws attaching the top layer of the screen from the body of the phone.
6. Make sure to remember what screw goes where.

7. Once the six screws are removed, you may take off the screen section of the phone, exposing the inner workings of the cell phone.
8. The screen section will be able to be removed after Step 4 is finished.

9. Be careful when removing the Logic Board from the body, lifting it with fingers on both sides to prevent damage of the Logic Board.
10. Separate the Logic Board from the main body of the device.

11. Insert in the replacement Logic Board, setting the Logic Board carefully back into place.

12. Set the screen carefully over the body of the phone, avoiding any sliding on the Logic board

13. Replace screws in the corresponding slots, tightening them till they are not loose.

14. Replace keypad onto the device

15. Lastly, you can place the cover onto the phone. You will know when it is in place if you hear a click after placing it in.