Samsung Rogue Motherboard Replacement

ID: 9016

Description: This guide will provide a step-by-step...

Steps:

1. Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.

2. Remove the five 3.4mm Philips screws securing the backing of the phone.

3. Use a plastic opening tool to carefully pry off the back cover.
4. Make sure you are prying along the edge and not between the two halves of the phone that slide away from each other.
5. Be careful to not drop the volume changing piece, for it can easily slip out.

6. Remove the two 3.45 mm Philips screws below the white sticker.

7. Carefully lift the motherboard up from the bottom edge.
8. The film of wires is still attached to the motherboard, so do not completely remove the motherboard just yet or you may damage it.

9. Use a plastic opening tool to disconnect the film from the motherboard.