Nostalgia GCM200 Heating Bowl Replacement

ID: 96363

Description: This guide will show you how to replace the...

Steps:

1. Remove the two 1.3 mm Phillips #2 screws.
2. Remove the S6 spanner screw.
3. Carefully place these three screws somewhere safe to use later in reassembly.

4. Split the device in half to expose the internal parts of the device.
5. Again, there are two more Phillips screws to remove.

6. Remove the two screws from both sides of the heating coil.

7. Remove the heating bowl from the plastic housing.