Samsung Gear VR Front Phone Mount Replacement

ID: 99020

Description: The first step to accessing the Samsung Gear...

Steps:

1. Remove the front cover to access a plate that holds the phone in place during use.
2. Remove the four corner screw covers with a metal spudger to reveal four screws.
3. Remove the sticker located at the top center to reveal two additional screws.

4. Using the PH000 tip remove the six 0.5 cm screws that secure the front phone mount.
5. After the six 0.5 cm screws are completely removed lift the front phone mount up and to the left.
6. When handling your equipment be careful not to strain the wire harness located on the left side of the headset.